Hardware Issues

14Point7.com > JAW: Just Another Wideband (Wideband Reader) > Hardware Issues

Pages: [1] 2

Subject	Started by	Replies	Views	Last post
Schematics	admin	4	2079	July 02, 2010, 01:53:34 AM by kjones6039
JAw 1.03 RPM Input circuit « 1 2 »	admin	26	4676	November 15, 2009, 02:02:03 PM by piledriver
free air calibration?	pdodson	13	257	August 10, 2010, 12:57:39 AM by wbjunkie
Jittery AFR using MS2	kjones6039	0	79	July 09, 2010, 07:54:26 PM by kjones6039
AEM Wideband Sensor with JAW 1.03	CTX-SLPR	0	66	July 01, 2010, 08:43:07 PM by CTX-SLPR
Please post here for JAW 1.041 issues « 1 2 3 4 5 »	Dave	60	5660	June 29, 2010, 10:10:38 PM by kjones6039
-127	RichardK	0	100	May 16, 2010, 03:53:31 PM by RichardK
Hooked up backwards, magic smoke came out.	donn29	2	727	March 05, 2010, 08:04:21 AM by donn29
Bung weld: Recessed or Surface Mount?	rxKaffee	2	418	January 19, 2010, 10:24:29 PM by admin
Bosch Sensor Not Heating Up	johnny23toronto	4	717	January 19, 2010, 08:53:14 PM by johnny23toronto
Calibration values	woolly	3	439	January 16, 2010, 03:25:33 PM by woolly
Please post here for JAW 1.03 issues. « 1 2 3 4 »	Dave	48	3690	December 27, 2009, 11:46:43 AM by PercentSevenC
Heat value stuck to 20, not 16, AFR shows ~17, actual ~14	Mingyue168	3	482	December 11, 2009, 10:07:56 PM by admin
Does the EGT display in Celsius or Farenheit?	Trike	3	566	November 28, 2009, 05:32:06 AM by MG David
AFR goes wrong after 20 minutes of driving (summer)	mxp_57	8	608	November 26, 2009, 04:49:53 AM by mxp_57
Display and heat shink works but sensor wont heat up	msuaet	1	380	November 13, 2009, 10:31:46 AM by admin
bosch sensor-what car was it OE for?	blacktruck	5	1015	November 09, 2009, 10:43:23 AM by piledriver
AT24C not found	Alan78	10	789	October 31, 2009, 01:43:22 AM by rxKaffee
display problem	woolly	11	923	October 26, 2009, 02:11:41 PM by woolly
Display question	undesiredshoe	1	356	October 26, 2009, 12:20:34 AM by admin